# **Rectangle Tracing**

KOI is able to find and track rectangles in a scene.

## Rectangle Tracing

![](../../functional_module/PWmodules/images/mcbanner.png)

### Load the KOI Extension: https://github.com/KittenBot/pxt-koi

### [Loading Extensions](../../Makecode/powerBrickMC)

Blocks for rectangle tracing:

![](KOI08/01-1.png)

### Sample Program

![](KOI08/02-1.png)

### Threshold

![](KOI08/04-1.png)

Threshold affects the detection rate, testing and fine tuning the value is needed for achieving the best results.

A higher threshold value decreases interference and noise, but detection difficulty increases at the same time, please trial and fine tune for different scenarios.

## Program Flow

Download the program to Micro:bit, then press A on the Micro:bit.

The coordinates and dimenions of the rectangle are shown on the KOI.

## Advanced Program

The information becomes more easily readable if we add an OLED screen.

### Connecting an OLED

Connect an OLED panel to the I2C port of your Robotbit/Armourbit.

![](KOI06/03-1.png)

### Sample Program

### Load the extension for OLED: https://github.com/KittenBot/pxt-oled

![](KOI08/03-1.png)

## Sample Code

[1. Rectangle Tracing (Extension0.5.7)](https://makecode.microbit.org/_2i4V1rWPUWiu)

[2. Rectangle Tracing /w OLED (Extension0.5.7)](https://makecode.microbit.org/_JA5eX5EAHcJp)

## Extension Version and Updates

There may be updates to extensions periodically, please refer to the following link to update/downgrade your extension.

[Makecode Extension Update](../../Makecode/makecode_extensionUpdate)

## FAQ

### 1: There is no reaction after pressing the buttons on the Micro:bit.

·    A: This is because KOI has a longer boot time than Micro:bit. When the power is turned on, Micro:bit has already ran the code for KOI initialization before KOI is ready.

·    Solution: Reset your Micro:bit after KOI has been turned on. (The trick is to let KOI power on completely before initialization.)

### 2: Does KOI work with 3V input?

·    A: No, KOI only works with 5V.

### 3: How do I improve detection rate?

·    Adjust the threshold value.

·    Keep a clean background.

·    Make sure the rectangle has a sharp outline.